Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Fri Dec 18 03:32:53 GMT 2009
    dan@ngaio.unixathome.org:/usr/obj/usr/src/sys/NGAIO i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1802.31-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x1<LAHF>
real memory  = 1073741824 (1024 MB)
avail memory = 1036038144 (988 MB)
ACPI APIC Table: <A M I  OEMAPIC >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA K8T800Pro host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xf0000000-0xf7ffffff,0xfbf00000-0xfbf0ffff irq 16 at device 0.0 on pci1
ahc0: <Adaptec 2944 Ultra SCSI adapter> port 0x9400-0x94ff mem 0xfb400000-0xfb400fff irq 16 at device 9.0 on pci0
ahc0: [ITHREAD]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0x9800-0x980f mem 0xfb600000-0xfb60000f,0xfa800000-0xfaffffff irq 16 at device 11.0 on pci0
twe0: [GIANT-LOCKED]
twe0: [ITHREAD]
twe0: 2 ports, Firmware FE7X 1.05.00.063, BIOS BE7X 1.08.00.048
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa000-0xa03f mem 0xfb900000-0xfb900fff,0xfb800000-0xfb8fffff irq 17 at device 12.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:04:ac:a3:70:3d
fxp0: [ITHREAD]
ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0xa400-0xa4ff mem 0xfbb00000-0xfbb00fff irq 18 at device 13.0 on pci0
ahc1: [ITHREAD]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
atapci0: <VIA 6420 SATA150 controller> port 0xc400-0xc407,0xc000-0xc003,0xb800-0xb807,0xb400-0xb403,0xb000-0xb00f,0xa800-0xa8ff irq 20 at device 15.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0xa000
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0xa000
usbus1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0xa000
usbus2: <VIA 83C572 USB controller> on uhci2
uhci3: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device 16.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0xa000
usbus3: <VIA 83C572 USB controller> on uhci3
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbd00000-0xfbd000ff irq 21 at device 16.4 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <VIA VT6202 USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ACPI Warning: \\_SB_.PCI0.SBRG.FDC_._FDE: Return type mismatch - found Package, expected Buffer 20090521 nspredef-1051
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xccfff,0xcd800-0xcdfff,0xce000-0xce7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1802314269 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <VIA> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acd0: DVDR <HL-DT-ST DVDRAM GSA-H10A/JL02> at ata1-master UDMA33 
ad3: 114473MB <WDC WD1200JB-00GVC0 08.02D08> at ata1-slave UDMA100 
ad4: 381554MB <Seagate ST3400832AS 3.03> at ata2-master UDMA100 SATA 1.5Gb/s
ad6: 117246MB <Maxtor 6Y120M0 YAR51HW0> at ata3-master UDMA100 SATA 1.5Gb/s
twed0: <Unit 0, TwinStor, Normal> on twe0
twed0: 152626MB (312579760 sectors)
GEOM_MIRROR: Device mirror/gm0 launched (2/2).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe30:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe30:ata0:0:0:0): CAM Status: SCSI Status Error
(probe30:ata0:0:0:0): SCSI Status: Check Condition
(probe30:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0
(probe30:ata0:0:0:0): Medium not present
(probe30:ata0:0:0:0): Unretryable error
ugen4.2: <vendor 0x0402> at usbus4
umass0: <vendor 0x0402 USB 2.0 Storage Device, class 0/0, rev 2.00/1.03, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:5:0:-1: Attached to scbus5
(probe15:ahc0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe15:ahc0:0:0:0): CAM Status: SCSI Status Error
(probe15:ahc0:0:0:0): SCSI Status: Check Condition
(probe15:ahc0:0:0:0): UNIT ATTENTION asc:29,0
(probe15:ahc0:0:0:0): Power on, reset, or bus device reset occurred
(probe15:ahc0:0:0:0): Retrying Command (per Sense Data)
(probe20:ahc0:0:5:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe20:ahc0:0:5:0): CAM Status: SCSI Status Error
(probe20:ahc0:0:5:0): SCSI Status: Check Condition
(probe20:ahc0:0:5:0): UNIT ATTENTION asc:29,0
(probe20:ahc0:0:5:0): Power on, reset, or bus device reset occurred
(probe20:ahc0:0:5:0): Retrying Command (per Sense Data)
(probe5:ahc1:0:5:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe5:ahc1:0:5:0): CAM Status: SCSI Status Error
(probe5:ahc1:0:5:0): SCSI Status: Check Condition
(probe5:ahc1:0:5:0): UNIT ATTENTION asc:29,0
(probe5:ahc1:0:5:0): Power on, reset, or bus device reset occurred
(probe5:ahc1:0:5:0): Retrying Command (per Sense Data)
sa0 at ahc1 bus 0 scbus0 target 5 lun 0
sa0: <QUANTUM DLT7000 1E48> Removable Sequential Access SCSI-2 device 
sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
sa1 at ahc0 bus 0 scbus1 target 5 lun 0
sa1: <DEC TZ89     (C) DEC 1837> Removable Sequential Access SCSI-2 device 
sa1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
cd0 at ata0 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H10A JL02> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <USB 2.0 Storage Device 0100> Fixed Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
ch0 at ahc0 bus 0 scbus1 target 0 lun 0
ch0: <DEC TL800    (C) DEC 0326> Removable Changer SCSI-2 device 
ch0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
ch0: 10 slots, 1 drive, 1 picker, 0 portals
Trying to mount root from ufs:/dev/twed0s1a